IMMERSION VIBRATORS WITH A FLEXIBLE SHAFT IV-117А, IV-116-1,6, EPK-1300
The immersion vibrator IV-117А and IV-116А-1,6 are powered through step-down transformer from industrial (380V, 3 phases, 50Hz) network. The EPK-1300 set is designed for a single-phase network (alternative current of 220V, 50 Hz) and is powered via an electrical safety disconnecting device.
The vibrator with a flexible output shaft and a vibro-head is used for compaction of concrete mixes poured into small areas, cast-in-situ constructions with dense and medium reinforcement and spacing of reinforcement exceeding 1,5 of the head diameter.
The immersion vibrators are used to achieve a stronger adhesion between concrete and reinforcement as well as to enhance consistency of the concrete mix. Application of immersion vibrators has a positive effect on quality, strength and life of concrete products.
Parameters |
IV-75 |
IV-113 |
IV-117А |
IV-116А |
IV-116А-1,6 |
EPK-1300 |
BP-5,5 |
Motor type |
Asynchronous electric motor |
gasoline- | |||||
diameter of the vibro-head working section, mm |
28 |
38 |
51 |
76 |
76 |
28, 38, 51, 76 |
28, 38, 51,76 |
Flexible shaft length |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
3; 4; 4,5; 6; 9 |
Motor output capacity, kW |
1,00 |
1,00 |
1,00 |
1,40 |
1,60 |
1,30 |
4 |
Current frequency, Hz |
50 |
50 |
50 |
50 |
50 |
50 |
|
Power supply |
42V, 3ph |
42V, 3ph |
42V, 3ph |
42V, 3ph |
42V, 3ph |
220V, 1ph. |
АI 92 gasoline |